3D laser scanning of the Saint-Quentin-en-Yvelines Velodrome in Paris, France

3D Laser Scanning at Hofdi Lodge Hotel, Iceland

3D laser scanning of a building for the construction of concrete structures for a hotel complex. The work was carried out to assess the compliance of the as-built volume with the design.

View project

Farm house. Laser scanning and model preparation

The surveying process for such a building takes about 2 hours, fully surveying both inside and out. This is followed by processing and registration of the measurements, and finally a point cloud that can be used for design, 3D modeling, measurements, and other tasks that do not require re-surveying the building.

View project

Scanning the new building of the Disaster Management Centre in Rūjiena

View project

Krišjāņa Valdemāra iela 31 – 3D laser scanning and modelling

3D laser scanning of a 2400m2 building as well as development of a 3D model for perspective design work.

View project

Latvian Oncology Centre – extensive building surveying for BIM project model development

The Oncology Centre building and grounds were scanned over a large area - several floors above ground, the underground floor and the entire height of the lift shafts, recording their verticality.

View project

3D model of the Emirates Arena cycle track, Glasgow

3D laser scanning of the velodrome to develop video analysis solutions for the track.

View project

3D laser scanning of a church building

View project

3D laser scanning of the attic of a building in Tallinas Street

View project

3D laser scanning of the RAKUS elevator shaft

View project

3D laser scanning of metal parts

View project

Kandavas K. Mīlenbaha Secondary School – 3D laser scanning

3D laser scanning of Kandava Kārlis Mīlenbachs Secondary School.

View project

Dzirnavu iela 128 – 3D laser scanning

3D laser scanning of the building at 128 Dzirnavu Street, Riga

View project

Facade scanning, creation of 3D model and facade visualisations for an apartment building

A model of an apartment building designed for a façade retrofit. Before the drawing work, the building volume was scanned, a point cloud was created and the building was redrawn 1:1.

View project

Detailed building survey for plans and elevations in Jurmala

A high-precision laser scanner was used to scan the building, capturing the volume of the facade, a small part of the interior and the volume of the attic structures.

View project

Attic model of the building

The attic of this building was scanned in order to draw the actual roof structure. Using a point cloud it is very easy to redraw the existing situation of a building without spending extra time on site.

View project

Shopping centre scan

3D model

View project